I-GDW-100F/150F Umshini Wokuhlola I-Electronic Universal izinga lokushisa eliphezulu neliphansi


  • Amandla:100kN/150kN
  • Isivinini se-Crosshead:0.05-1000 mm/min
  • Ukunemba:0.5
  • Amandla:220V±10%
  • I-Tensile Space:900mm
  • Isisindo:650KG
  • Ukucaciswa

    Imininingwane

    Inkambu yohlelo lokusebenza

    Umshini wokuhlola izinga lokushisa eliphezulu ophansi usetshenziselwa ukuhlola amandla ezinto eziqinile ngaphansi kwezinga lokushisa elihlukile, lapho kuhlolwa izinga lokushisa elivamile, lingasusa ikhabethe lokushisa.

    Imininingwane ye-UTM

    Imodeli

    I-WDG-100E (10E-100E ngokuzithandela)

    I-WDG-150E

    Amandla okuhlola aphezulu

    100KN/10 amathani (ongakukhetha 1 ton -10 tons)

    150KN amathani ayi-15

    Ileveli yomshini wokuhlola

    0.5 izinga

    0.5 izinga

    Ibanga lokulinganisa amandla okuhlola

    2%~100%FS

    2%~100%FS

    Iphutha elihlobene lenkomba yamandla okuhlola

    Ngaphakathi ±1%

    Ngaphakathi ±1%

    Iphutha elihlobene lenkomba yokugudluka kwensimbi

    Ngaphakathi ±1

    Ngaphakathi ±1

    Ukulungiswa kokususwa

    0.0001mm

    0.0001mm

    Ibanga lokulungiswa kwesivinini se-Beam

    0.05~1000 mm/min (kulungiswe ngokungafanele)

    0.05~1000 mm/min (kulungiswe ngokungafanele)

    Iphutha elihlobene lejubane le-beam

    Ngaphakathi ±1% yenani elimisiwe

    Ngaphakathi ±1% yenani elimisiwe

    Indawo yokwelula ephumelelayo

    Imodeli ejwayelekile engu-900mm (ingenziwa ngezifiso njengoba kudingeka)

    Imodeli ejwayelekile engu-900mm (ingenziwa ngezifiso njengoba kudingeka)

    Ububanzi bokuhlola obusebenzayo

    Imodeli ejwayelekile engu-500mm (ingenziwa ngezifiso ngokuya ngezidingo)

    Imodeli ejwayelekile engu-500mm (ingenziwa ngezifiso ngokuya ngezidingo)

    Ubukhulu

    720×520×1850mm

    820×520×1850mm

    Servo motor control

    1KW

    1.5KW

    ukunikezwa kwamandla kagesi

    220V±10%;50HZ;1KW

    220V±10%;50HZ;1.5KW

    Isisindo somshini

    550Kg

    650Kg

    Ukucushwa okuyinhloko: 1. Ikhompyutha yemboni 2. Iphrinta ye-A4 3. Isethi yesithando sokushisa esiphezulu 5. Isethi yenduku yokushisa okuphezulu

    Ukucaciswa kwethangi lokushisa Eliphezulu neliphansi

    Imodeli

    I-HGD—45

    Bore size

    Usayizi wegumbi langaphakathi: (D×W×H mm): cishe 240×400×580 55L (kungenziwa ngokwezifiso)

    Ibanga lokushisa

    Ubukhulu: (D×W×H mm) cishe 1500×380×1100 (kungenzeka ngokwezifiso)

    Ukunemba kokulawula izinga lokushisa

    Izinga lokushisa eliphansi -70℃~izinga lokushisa eliphezulu 350℃ (customizable)

    Izinga lokushisa elifanayo

    ±2ºC;

    Izinga lokushisa

    ±2ºC

    Imbobo yokubuka

    3~4℃/min;

    Ukulawula izinga lokushisa

    Iwindi lokubuka ingilazi yokushisa kagesi elingenalutho (lapho izinga lokushisa lingama-degree angu-350, iwindi lokubuka lizungezwe insimbi engagqwali)

    Impahla yodonga lwangaphandle

    Ukulawula ukushisa okuzenzakalelayo kwe-PID;

    Izinto zangaphakathi zodonga

    Ukufafaza nge-iron plate ebandayo;

    Insulation impahla

    Sebenzisa izinto zamapuleti ensimbi engagqwali;

     

     

     

     

     

    Isistimu ye-air conditioning

    a Ukulawula izinga lokushisa: Ukulawulwa kwe-PID;

    b Idivayisi yokuhambisa umoya: fan ye-centrifugal;

    c Indlela yokushisa: isifudumezi sikagesi se-nickel-chromium, umoya ophoqelelwe kanye nokulungiswa kwezinga lokushisa lokujikeleza kwangaphakathi;

    d Indlela yokupholisa umoya: isiqandisi sokucindezela ngomshini;

    e Inzwa yokulinganisa izinga lokushisa: ukumelana neplatinamu;

    f I-compressor yesiqandisi: i-compressor ekabili;

     

     

     

     

     

    Idivayisi yokuvikela ukuphepha

    Ukulayisha ngokweqile kwamandla nokuvikelwa kwesifunda esifushane;

    a I-compressor yesiqandisi ayinaso isivikelo sesigaba;

    b Ukuvikela phansi;

    c Ukuvikelwa kwezinga lokushisa elingaphezu kwamandla;

    d Isiqandisi ukuvikela umfutho ophakeme nophansi.

    Ukuqina nokuthembeka

    Ipayipi lesistimu yokupholisa kufanele lishiselwe futhi livalwe ngokwethembeka;

    Ithoshi

    I-1 (ivikela umswakama, ingaqhumi, ibekwe endaweni efanele, iswishi yokulawula yangaphandle);

    Kokubili uhlaka lomnyango kanye nonqenqema lwephaneli yomnyango kufakwe imishini yokushisa kagesi ukuvimbela ukufingqa noma isithwathwa ngesikhathi sokuhlolwa kwezinga lokushisa eliphansi;

    Ukunikezwa kwamandla kagesi

    I-AC 220V, 50Hz 5.2KW

    Izici Eziyinhloko

    1.I-Computer + Software control futhi ibonise izinhlobo eziyisi-6 zamajika okuhlola: Ukugudluza ngamandla, ukuguqula amandla, ukususa ukucindezeleka, ukuguqulwa kwengcindezi, isikhathi sokuphoqa, isikhathi sokufuduka

    I-2.Ingafakwa i-extensometer ukuhlola ukuguqulwa kwerabha noma impahla yensimbi

    I-3.Ingenza ukuhlolwa kokushisa okuphansi okuphezulu nge-ovini yokushisa ephansi kanye nesithando somlilo

    4.Ingafakwa zonke izinhlobo zokulungiswa kokuhlolwa, ukulungiswa kwe-manual / hydraulic / pneumatic

    I-5.Ingenziwa ngezifiso ubude, ububanzi, futhi ilandele noma yiliphi izinga lokuhlola noma isicelo sekhasimende

    6.Futhi ube Nohlobo Lokuboniswa Kwedijithali.

    Okujwayelekile

    I-ASTM, ISO, DIN, GB namanye amazinga omhlaba.


  • Okwedlule:
  • Olandelayo:

  • img (3)

    Bhala umyalezo wakho lapha futhi usithumelele wona